PDF + FLOOR PLAN TAKEOFF

Measure a floor plan instead of redrawing it from scratch.

Use a PDF page or plan image as a calibrated reference, trace the geometry you need, and carry that measured project forward into material takeoff, 2D/3D review and estimating.

PDF + image referenceScale calibrationTrace walls + floors2D + 3D review

PLAN-BASED WORKFLOW

Keep the original drawing visible while you build measurable geometry.

MetricSketch treats the imported plan as a reference layer. The project geometry remains editable and measurable, while the source drawing stays available underneath for context.

PDF page import

Choose the page you need from a PDF and use it as a plan reference without turning the whole document into project geometry automatically.

Known-dimension calibration

Set scale from a real dimension so traced distances and areas correspond to the project instead of screen pixels.

Trace and align

Trace floors and walls over the reference and use drawing assistance where available to keep project geometry aligned with the plan.

Measured project output

Once the geometry exists, use it for takeoff quantities, material planning, costs, 2D/3D review and professional project output.

PDF TAKEOFF WORKFLOW

A controlled path from drawing to measurement.

The goal is not to pretend every PDF is a perfect CAD model. It is to give you a reliable reference that can be calibrated, traced and checked.

  1. 01

    Import the plan

    Select a PDF or image reference. For PDFs, choose the page that contains the drawing you want to measure.

  2. 02

    Pick a known dimension

    Use a dimension printed on the plan or another measurement you trust as the calibration reference.

  3. 03

    Calibrate

    Set the real-world scale so the drawing reference and Project Builder geometry use the same measurement basis.

  4. 04

    Trace what matters

    Create floors, walls, openings and levels over the drawing instead of tracing details that do not affect your takeoff.

  5. 05

    Check and quantify

    Review the result in 2D and 3D, then use the measured model for takeoff, materials, pricing and output.

CALIBRATION EXAMPLE

One trusted dimension establishes the scale for the plan reference.

If a dimension line on the drawing says a wall is 5.00 m, calibrate that measured span to 5.00 m. The reference can then support consistent tracing across the rest of the drawing, subject to the accuracy of the source plan.

Calibration accuracy depends on the quality, distortion and reliability of the source drawing. Always verify critical dimensions before ordering or construction.
Reference sourcePDF or image
Calibration basisKnown dimension
Project geometryEditable
Next stepTakeoff + estimate

FLOOR PLAN TAKEOFF FAQ

Common questions about measuring plans.

Can MetricSketch import a PDF floor plan?

Yes. You can select a PDF page and use it as a plan reference in Project Builder. The selected page is used as a visual reference that you calibrate and trace.

Does MetricSketch automatically convert a PDF into a CAD or BIM model?

No. The current workflow uses the PDF as a calibrated reference and lets you create the measurable project geometry over it. That keeps the result reviewable instead of claiming that every drawing can be converted perfectly automatically.

How do I set the scale of an imported plan?

Choose a dimension on the drawing whose real value you know, measure the same span in the reference and enter the real dimension. MetricSketch uses that relationship to establish scale.

What can I do after tracing the floor plan?

The traced geometry can be used for 2D and 3D review, material takeoff, quantity breakdowns, project pricing and professional estimate output.

FREE OPEN BETA

Start with the drawing you already have.

Import a PDF or image into Project Builder, calibrate it and trace only the geometry needed for your takeoff and estimate.

Open Project Builder